ASME B16.5 Standard-Pipe Flanges and Flanged Fittings(NPS 1/2 Through NPS 24 Metric/Inch Standard) Component Size

ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings.

Haihao Group forged flanges engineering department,design,produce,inspect and supply our forged flanges according to the ASME B16.5 standard.

ASME B16.5 Standard – Pipe Flanges and Flanged Fittings(NPS 1/2 Through NPS 24 Metric/Inch Standard)

ANSI B16.5 A105N RTJ weld neck flanges

ANSI B16.5 A105N RTJ weld neck flanges

3.COMPONENT SIZE

3.1 Nominal Pipe Size

As applied in this Standard,the use of the phrase “nominal pipe size” or the designation NPS followed by a dimensionless number is for the purpose of pipe,flange,or flanged fitting end connection size identification.The number is not necessarily the same as the flange or flanged fitting inside diameter.

3.2 Reducing Fittings

Reducing fittings shall be designated by the NPS for the openings in the sequence indicated in the sketches of Figure 5.

3.3 Reducing Flanges

Reducing flanges shall be designated by the NPS for each opening.See examples in Note(4) of Table 6(Table Ⅱ-6 of Mandatory Appendix Ⅱ).

Related:

ASME B16.5 Welding Neck Flange Dimensions (150lb-2500lb)
ASME B16.5 Slip On Flange Dimensions (150lb-1500lb)
ASME B16.5 Blind Flange Dimensions (150lb-2500lb)
ASME B16.5 Socket Welding Flange Dimensions (150lb-1500lb)
ASME B16.5 Lap Joint Flange Dimensions (150lb-2500lb)
ASME B16.5 Threaded Flange Dimensions (150lb-2500lb)

PREV
NEXT

RELATED POSTS