Project order for 32750 duplex stainless steel

32750 material is a super duplex stainless steel supplied in the state of hot working and solution annealing. As a super duplex stainless steel, it combines the ideal aspects of austenite and ferrite grades. Higher chromium, molybdenum and nitrogen contents result in a pitting equivalent value (prEN) > 40, providing pitting and crevice corrosion properties superior to austenitic and duplex stainless steels in almost all corrosion media, and the critical pitting temperature exceeds 50 ° C.

LR 90 Degree Elbow ASME B16.9 ASTM A815 32750

LR 90 Degree Elbow ASME B16.9 ASTM A815 32750

Provided in the annealed state, its yield strength reaches 80ksi (550MPa), which is higher than most austenitic and duplex stainless steel grades. It cannot be hardened by heat treatment, but can be strengthened by cold working. It also has a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steel and is suitable for operating temperatures up to 300 ° C. Alloy 32750 is listed in NACE Mr 0175 for sour service and has obtained ASME Pressure Vessel application certification.

32750 duplex stainless steel main features:

  • excellent corrosion resistance in a variety of corrosive chemicals
  • pitting resistance equivalent (prEN) > 40
  • excellent resistance to pitting and crevice corrosion in seawater and other chloride containing environments
  • the critical pitting temperature exceeds 50 ° C
  • high strength compared with austenitic and 22% Cr duplex stainless steel
  • excellent ductility and impact strength at ambient and below zero temperatures
  • high resistance to wear, erosion and cavitation
  • excellent resistance to stress corrosion cracking in chloride containing environments
  • listed in NACE Mr 0175 for sour service
  • ASME Pressure Vessel application certification
Pipe ASTM A928 32750

Pipe ASTM A928 32750

Our company has just produced a batch of 32750 pipe fittings, which are used on the ballast water system on the FPSO of SBM company, including tee,elbow,reducer and flange. The specifications are as follows:

WN 300 lb RF Flange; 16″ Sch. Std/40S; F53
Weld Eccentric Reducers 16″ Sch.Std/40S -14″ Sch.Std/40S/40; WP-W UNS S32750
Weld Elbow 14″ Sch. Std/40S 90 LR; WP-W UNS S32750
Seamless/Weld Pipe 8″Sch.Std/40S/40; UNS S32750; 0.3m cut length
Weld Elbow 8″ Sch. Std/40S/40 90 LR; WP-W UNS S32750
WN 300 lb RF Flange; 8″ Sch. Std/40S/40; F53
Seamless/Weld Pipe 10″Sch.Std/40S/40; UNS S32750; 0.2m cut length
Weld Elbow 10″ Sch. Std/40S/40 90 LR; WP-W UNS S32750
WN 300 lb RF Flange; 10″ Sch. Std/40S/40; F53
WN 300 lb RF Flange; 4″ Sch. Std/40S/40; F53
WN 300 lb RF Flange; 4″ Sch. Std/40S/40; F53

The goods have been produced and will be sent to the shipyard.If you need  32750 duplex stainless steel,please feel free to contact us.Email:sales@haihaogroup.com

PREV
NEXT

RELATED POSTS