A234 WPB Inconel 625 Overlay Fittings for Singapore Sour Service Piping
Haihao Group has completed fabrication and shipment of internally overlaid piping fittings for a sour service project in Singapore. This scope covers an eccentric reducer and equal tee built with A234 WPB base material and Inconel 625 overlay, engineered to resist corrosive sour media while meeting strict low-temperature toughness limits.
This Inconel 625 overlay fitting uses UNS N06625 cladding on the internal bore, with a minimum overlay thickness of 3 mm. The eccentric reducer is sized 24″ × 18″, wall 0.312″ × S10, and the equal tee is 8″ SCH 20. The overlay acts as a corrosion barrier, while the carbon steel base provides mechanical strength for the pressure boundary. The full set is produced following NACE requirements for sour operating conditions.

Inconel 625 overlay butt weld fitting, A234 WPB base, internal 3mm overlay, NACE sour service for Singapore project
Special material substitution rules apply to this Inconel 625 overlay fitting. Charpy impact targets are set at -20℃: average 27 J, minimum single value 20 J. Chemical limits are tightly controlled, with sulfur below 0.01% and phosphorus below 0.015% to preserve weld and heat-affected zone integrity.
Every Inconel 625 overlay fitting undergoes mandatory post-overlay heat treatment. The heat treatment cycle is validated to stabilize the metallographic structure of both base metal and overlay interface. Ultrasonic testing is performed to verify bond integrity, checking for lack of fusion, delamination or subsurface defects at the transition between carbon steel and Inconel cladding.
Sour service packages in Southeast Asia often create challenges for fabricators. Many workshops can perform overlay welding but struggle to balance overlay bond quality, low-temperature toughness and strict chemical caps at the same time. Our quality team runs the test plan before overlay starts, monitors heat treatment records, and bundles all UT, metallurgy and impact reports for client review.
If you are sourcing sour service components, Inconel 625 overlay fitting, tees or reducers with custom cladding thickness and impact requirements, send over your datasheet and NACE clauses. Haihao Group can support material substitution reviews, overlay procedure qualification and full documentation for Singapore and regional offshore and onshore piping projects.
